不繡鋼1.4313是馬氏體級，耐灼傷性好，熱清理后持久性好。X3CrNiMo13-4鋼的機裝備效能是可能電學完分中鉬和鎳的高份量。這樣的耐熱合金加入劑約束了添加級碳份量的需要——給定氧濃度相同于奧氏體不繡鋼。然而鎳份量不夠，但鎳份量約為4%，為顯著增強了鋼對一些灼傷室內生態的反抗力——第二次機裝備效能。X3CrNiMo13-4鋼手機用戶可分娩自由高達300℃在攝氏度下作業的元器件和元器件，并且 裸露在一些灼傷室內生態中的元器件，同一時間維持滿足的界面標準括抗氯化物材質)。QT650.QT780和QT900標準下，熱清理后常用交由工字鋼。半原材料用以石油氣分娩.礦業.在石油化工和再生能源服務行業，渦輪機機裸露在高性情溫和高低溫下.泵.壓縮視頻機元件。鋼隱疼合不銹鋼焊接。

MATERIAL SPECIFICATIONS -BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C (％): ≤ 0.050Si (％): ≤ 0.70Mn (％):≤ 1.50P (％)≤:0.040S (％)≤:0.030Cr (％): 12.0 ~ 14.0Ni (％): 3.50~ 4.50Mo (％):0.30 ~ 0.70Other (％): N ≥ 0.020

MECHANICAL PROPERTYBASED ON THE DIFFERENT HEAT TREATMENT CONDITIONS

Condition of thermal treatment: annealedHardness HBS: 320Tensile strength σb/MPa:1100Thickness/≤mm: 60Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: 60<d≤160Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ(transversal)≥(％): 12Impact absorbing power Akv≥/J|transversal: 50Thickness/≤mm: ≤160Condition of thermal treatment: QT780Yield strength σ0.2≥/MPa:620Tensile strength σb/MPa:780~980Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: ≤160Condition of thermal treatment: QT900Yield strength σ0.2≥/MPa:800Tensile strength σb/MPa:900~1100Elongation δ( longitudinal )≥(％):12Impact absorbing power Akv≥/J| longitudinal:50提供EN1.4313馬氏體不銹鋼材質存在固溶處理的特點（+A）模式、表面淬火和回火(+QT650)調質(+QT700)，調質(+QT780)，調質(+QT900)，都要哪一款 一些 要跟業務范圍說知道哦。